As a professional in the architecture and planning industry, you understand the importance of maintaining a clean and accurate email list. Tham & Videgård Arkitekter, a renowned architecture firm based in Sweden, uses the domain tvark.se for their email communications. However, verifying emails from this domain can be a challenge due to its catchall nature. In this blog post, we'll discuss the difficulties of verifying emails at tvark.se, the risks of not verifying them, and how BounceBan can help you overcome these challenges.

Understanding tvark.se

Tham & Videgård Arkitekter is a Swedish architecture firm that has been in operation for several years. Their domain, tvark.se, is used for all email communications. The domain is set up as a catchall, which means that it can accept emails sent to any address, even if it doesn't exist. This setup can make it difficult for traditional email verification services to accurately verify email addresses.

Challenges of Verifying Emails at tvark.se

Verifying emails at tvark.se can be challenging due to several reasons:

• Email Security Gateways: tvark.se may use email security gateways like Cisco Secure Email (ESA), Barracuda, Proofpoint, Abnormal Security, Mimecast, SpamTitan, Checkpoint, Forrester, Sophos, etc., which can make simple SMTP tests fail. This means that traditional verification services may not be able to accurately verify email addresses.
• Catchall Emails: tvark.se is set up as a catchall, which means that simple SMTP tests used by traditional verification services may not be able to verify email addresses. This can lead to a high number of false positives or false negatives.
• No Bounce Messages: tvark.se may not always return a bounce message even if you send a test message to an invalid email address. This makes it difficult for services like Scrubby to verify emails.

Risks of Not Verifying Emails at tvark.se

Not verifying emails at tvark.se can lead to several risks:

• High Bounce Rate: If you don't verify emails, you may end up with a high bounce rate, which can damage your sending reputation and lower your delivery rate, open rate, and click rate.
• Missed Opportunities: If you delete all unverified emails, you may miss out on potentially valuable contacts.
• Outdated Lists: If you don't regularly verify your email list, it can become outdated, leading to a high bounce rate and poor email performance.

Using BounceBan to Verify Emails at tvark.se

BounceBan is a powerful email verification service that can accurately verify emails at tvark.se, including catchall emails. Here's how to use BounceBan to verify emails:

• Individual Verification: Create a free account at https://bounceban.com/, go to the BounceBan dashboard https://bounceban.com/app/verify, enter the email for verification (e.g., xxx@tvark.se), and click the "Verify for free" button. BounceBan provides unlimited free single verifications.
• Bulk Verification: To verify emails from tvark.se and other domains in bulk, you can upload a CSV at https://bounceban.com/app/bulk/list.
• API Integration: If you're a developer, you can easily integrate BounceBan via the APIs. API reference: https://bounceban.com/public/doc/api.html

Why BounceBan?

BounceBan is the only service capable of reliably verifying catchall emails and emails behind Email Security Gateways. Traditional services like Emailable, NeverBounce, ZeroBounce, DeBounce, SendGrid, Snov, RocketReach, and Hunter are unable to verify catchall emails.

Approximately 40-50% of business emails are catchalls, which are not verifiable by other services. BounceBan, however, can accurately verify over 80% of these emails with a 97%+ accuracy rate. Catchall emails that cannot be verified with certainty will be tagged as 'risky', accounting for about 20% or less.

BounceBan's success rate in verifying catchall emails is on a consistent upward trajectory. It verifies millions of emails daily and leverages advanced AI to recognize patterns and enhance accuracy. BounceBan verification is fast, taking only a few seconds for most emails. For a small share of catchall emails, it may take a few minutes. You can verify thousands of emails concurrently.

Unlike Scrubby, BounceBan never has to actually send an email to verify the email. It uses an AI finetuned with lots of signals to accurately verify all emails, including catchall emails. This makes BounceBan completely compliant with GDPR.

FAQs

1. What is the main challenge of verifying emails at tvark.se? The main challenge is that tvark.se is set up as a catchall, which makes it difficult for traditional verification services to accurately verify email addresses.
2. What is the risk of not verifying emails at tvark.se? The risk is a high bounce rate, which can damage your sending reputation and lower your delivery rate, open rate, and click rate.
3. How can I verify emails at tvark.se? You can use BounceBan, which is capable of accurately verifying catchall emails and emails behind Email Security Gateways.
4. What is the accuracy rate of BounceBan? BounceBan has a 97%+ accuracy rate in verifying catchall emails.
5. How long does it take to verify emails using BounceBan? Verification is fast, taking only a few seconds for most emails. For a small share of catchall emails, it may take a few minutes.

1. Can BounceBan verify catchall emails at tvark.se? Yes, BounceBan is capable of accurately verifying catchall emails at tvark.se.
2. How does BounceBan verify emails at tvark.se? BounceBan uses advanced AI to recognize patterns and enhance accuracy.
3. Can I verify emails in bulk using BounceBan? Yes, you can upload a CSV at https://bounceban.com/app/bulk/list to verify emails in bulk.
4. Is BounceBan compliant with GDPR? Yes, BounceBan is completely compliant with GDPR because it never has to actually send an email to verify the email.
5. How can I integrate BounceBan with my application? You can easily integrate BounceBan via the APIs. API reference: https://bounceban.com/public/doc/api.html

1. What is the domain of Tham & Videgård Arkitekter? The domain is tvark.se.
2. What is the industry of Tham & Videgård Arkitekter? The industry is architecture and planning.
3. What is the most common email pattern at tvark.se? The most common email pattern is smith.john@tvark.se (23%).
4. Does tvark.se use email security gateways? It is unclear whether tvark.se uses email security gateways, but if it does, it can make simple SMTP tests fail.
5. What is the MX record of tvark.se? The MX record is tvark-se.mail.protection.outlook.com.
6. Is tvark.se set up as a catchall? Yes, tvark.se is set up as a catchall.
7. What is the address of Tham & Videgård Arkitekter? The address is not publicly available.
8. Can I use BounceBan to verify emails at tvark.se? Yes, BounceBan is capable of accurately verifying emails at tvark.se, including catchall emails.
9. How many email patterns are commonly used at tvark.se? There are four common email patterns used at tvark.se: smith.john@tvark.se (23%), jsmith@tvark.se (11%), john.smith@tvark.se (7%), and john.smith@tvark.se (6%).
10. Is BounceBan the only service that can verify catchall emails at tvark.se? BounceBan is the only service capable of reliably verifying catchall emails and emails behind Email Security Gateways.

By using BounceBan to verify emails at tvark.se, you can ensure that your email list is accurate and up-to-date, reducing the risk of a high bounce rate and improving your email performance.